MSTAT
The MSTAT is a fuss free, simple to use manually operated thermostat.
KEY FEATURES
- Simple regulation (ON/OFF).
- MSTAT depth allows flush mounting in standard socket.
- Temperature regulation from 5º to 40ºC
- Floor probe ensures precise control of temperature.
- CE Marking - The thermostat meets the requirements of the following standards: EMC directive: EN61000-6-1:2001, EN61000-6-3:2001 Low voltage directive: EN60730-1, EN60730-2-9
TECHNICAL CHARACTERISTICS
| Supply voltage | 230V ±15% |
| Load | 16A, 3,600W |
| Temperature range | +5 / +40 °C |
| Ambient temperature during operation | 0/+40°C |
| Housing | IP 20 |
| Sensor Type | NTC, 3m |
INSTALLATION
Mounting of floor sensor:
The floor sensor is used for temperature regulation in floor surfaces.
The floor sensor must be placed under the floor surface and between two heating cables. The sensor wire must not cross or touch any of the heating wires.
Mounting of the thermostat
The single gang mounting box must have a depth of no less than 25 mm
1. Use a screwdriver in both sides to open the lock. The cover must be dismounted.
2. Connect cables.
3. The thermostat is mounted in the wall socket. The cover is remounted.
Please note: As with all electrical projects, all elecrical work should be carried out by a certified/qualified electrician in acordance with current regulations. All work must conform to the current IEE Wiring Regulations.
|
Documentation Download brochures, installation and technical guides about Warmup® products. |
 |
Bookmark with: